Water Level Meters / Water Level Indicators

Water level meters measure the depth of water in wells, boreholes and anywhere else where water depth measuring is desired.

Our water level meter range are well-made, easy to use, and read accurately to the millimetre. The reels come with a robust carrying handle, and the probe sits securely in a frame mount.

The probe has a gap between the electrodes. When contact is made with water, the circuit is completed, activating the buzzer and the light. The water level is determined by taking a reading from the measuring tape at the top of the well-casing or borehole. 

Settings 

The unit comes with three settings; Off, Test and Operation. 

Off is the setting to leave on normally. 

Test (I) is to confirm the unit is operating correctly and receiving power from the 9V battery. No water is required for the test. You will see the voltage meter move to the red zone if operating correctly. The light and buzzer do not operate during the test. 

Operation (II) is the normal operating mode for determining the water level. 

Specifications 

• Ruler cable width 10.4mm, PE coated. 

• Probe diameter: 13.6mm, length 225mm. 

• Reel: ABS 200m and under; Steel 300mm and above

• Frame: Steel 

• Battery required: 9V (not provided) 

• Conductor Material: Multi-stranded fine copper wire following VDE 0295 Class 5 

• Outer Jacket: PE Sheathed Transparent 

• Insulation resistance: > 200Mohm x km 

• Fire resistance: Following IEC 60332-1 

• Voltage Rating: 300 V / 300 V 

• Temperature Range: -40°C to +90°C 

• Test Voltage: 2000 V 

Standard length options for reel 

• 50m Water Level Meter

• 100m Water Level Meter  

• 200m Water Level Meter 

• 300m Water Level Meter

• Other sizes up to 700m available on request